23 Coolest Arbor Presses

 

Dake X Model Single Leverage Arbor Press with Solid Plate, 1 Ton Capacity, 4.5″ Maximum Working Height, 4.25″ Length x 9.5″ Width x 9″ Height #ad - Solid base and table fully support the object being pressed. Lever lowers the ram to provide up to 1 ton of force. Adjustable handle can be positioned for a comfortable grip or to attain maximum leverage. Ram cap can be adjusted using the two included shims to compensate for wear. Smooth action gears enable fine control over ram movement with the lever.

 

Dake 1-1/2 Model Ratchet Leverage Arbor Press with Handwheel and Counterweight, 3 Ton Capacity, 11.5″ Maximum Working Height, 7.25″ Length x 18″ Width x 19″ Height #ad - Open base and slotted table plate provide support for solid objects as well as an outlet for arbors and similar items to pass through. Counterweight repositions the lever to the top after a downstroke to reduce strain and quickly prepare for the next task. Smooth action gears enable fine control over ram movement with the lever. Handwheel quickly advances the ram for initial positioning, and the ratcheted lever lowers the ram onto the object and can be set at a comfortable position for the user. Ratcheted lever lowers the ram to provide up to 3 tons of force.

 

Heavy Duty Arbor Press 1/2 Ton #ad - The largest arbor is 1 inch. The cap over table is 4-1/2 inch and the ram is 7-1/2 inch. This press has heavy stud teeth, heavy casings, steel rams, and steel pinions. This is a four position anvil. This 1/2 ton arbor press is 10 inch in height and has a 6-1/2 inch max work diameter. The ratcheting presses puts the lever arm in the most comfortable position for final application of force.

 

Palmgren Ratcheting arbor press, 3 ton #ad - In addition, it has more clearance over the table for broaching or pressing large items. 0 ton lever ratio 38. A lockable fine adjustment adjusting screw accurately limits the depth of the ram stroke.   Sturdy, cast-iron construction rugged steel ram is driven by a machined pinion base drilled for mounting on a bench or pedestal includes three piece bit set, 1 pointed, 1 round and 1 square end bit, and a removable steel anvil the base is machine to hold the three bit set   [custom1] specification description model rp30 force 3. The ram is reversible with one end solid and the other end with a hole and magnet to hold bits and tools. Allows the operator to maintain the arm in the optimal leverage position with consistent application of force. Removable machined steel anvil provides accurate work support in four slot positions.     Delivers the heavy force needed for riveting, squeezing, punching, bending, and other pressing applications.     Punches or tools may be added to the end of the ram with the aid of a magnetic insert. It is counterweighted for rapid handle return and has a quick ram advance via the press’s side-mounted handwheel. 61 swing 13-3/4 in anvil diameter 8 in max work height 17-3/4 in ram dimensions 1-1/4 in x 1-1/4 in height 27-3/4 in base dimensions 10 in x 21-3/8 in weight 230 lb [/custom1].

 

Dake Y Model Single Leverage Arbor Press with Solid Plate, 1.5 Ton Capacity, 7.75″ Maximum Working Height, 6″ Length x 15″ Width x 14.5″ Height #ad - Solid base and table fully support the object being pressed. Adjustable handle can be positioned for a comfortable grip or to attain maximum leverage. Lever lowers the ram to provide up to 1-1/2 tons of force. Smooth action gears enable fine control over ram movement with the lever. Ram cap can be adjusted using the two included shims to compensate for wear.

 

Dake 0 Model Single Leverage Arbor Press with Base Opening and Slotted Table Plate, 1.5 Ton Capacity, 7.75″ Maximum Working Height, 6″ Length x 14″ Width x 14.5″ Height #ad - Open base and slotted table plate provide support for solid objects as well as an outlet for arbors and similar items to pass through. Adjustable handle can be positioned for a comfortable grip or to attain maximum leverage. Lever lowers the ram to provide up to 1-1/2 tons of force. Smooth action gears enable fine control over ram movement with the lever. Ram cap can be adjusted using the two included shims to compensate for wear.

 

Greenerd Arbor Press NO. 3 With History!! GM BOP #ad - Force in tons 3 base size (in) 9-1/2 x 17 3/4 width (in) 9-1/2&quot anvil dia work area (in) 6-5/8 table work surface (in) 8-1/8 x 8-1/2&quot swing (in) 12&quot country of origin (subject to change) china. Price for each construction cast iron features removable 4 position rotating anvil, large-toothed rack a magnetic insert to hold the punch range of slot widths (in) 1 to 2 ram dimensions (in) 1-1/2 x 1-1/2&quot max work height (in) 12-1/4&quot item arbor press height (in) 21-1/4&quot ram hole dia x depth (in) 1/2 x 1&quot depth (in) 17-3/4&quot.

 

Dayton 5Z077 Press, Arbor, 4 Ton #ad - Price for each construction cast iron features removable 4 position rotating anvil, large-toothed rack a magnetic insert to hold the punch range of slot widths (in) 3/4 to 2-3/4 ram dimensions (in) 1-3/4 x 1-3/4&quot max work height (in) 15-3/4&quot item arbor press height (in) 27-1/4&quot ram hole dia x depth (in) 1/2 x 1&quot depth (in) 21-1/8&quot. Force in tons 4 base size (in) 10-3/4 x 21-&quot/8 width (in) 10-3/4&quot anvil dia work area (in) 9-1/2 table work surface (in) 10 x 10-1/4&quot swing (in) 16-3/4&quot country of origin (subject to change) china.

 

JET AP-0 1/2 Ton Arbor Press #ad - Arbor presses. Precision cut steel rams and pinions for accurate operation. Tables and slotted table-plates are flat and parallel to provide accurate support. For all production and assembly applications.

 

Palmgren Arbor press, 3 ton #ad - Punches or tools may be added to the end of the ram with the aid of a magnetic insert. A lockable fine adjustment adjusting screw accurately limits the depth of the ram stroke. Sturdy, cast-iron construction rugged steel ram is driven by a machined pinion base drilled for mounting on a bench or pedestal includes three piece bit set, 1 pointed, 1 round and 1 square end bit, and a removable steel anvil the base is machine to hold the three bit set   [custom1] specification description model ap30 force 3. Delivers the heavy force needed for riveting, squeezing, punching, bending, and other pressing applications. 0 ton lever ratio 16. 91 swing 11- 3/4 in anvil diameter 6- 3/4 in max work height 12, 1/2 in ram dimensions 1- 1/2 x 1- 1/2 in height 21- 1/2 in base dimensions 9- 1/2 x 17- 3/4 in weight 135 lb [/custom1]. Depth stop securely clamps to the ram and withstands full pressure. Removable machined steel anvil provides accurate work support in four slot positions. The ram is reversible with one end solid and the other end with a hole and magnet to hold bits and tools.

 

Arbor Press Magnetic Pin Press Chucking Tool #ad - Pin chuck assures that the press pin is held perpendicular to the pressing force. Super strong niodymium magnetic base. Mathews engineering arbor press magnetic pin press chuck tool. Drill rod starter assortment includes 1/16″x15″, 3/32″x2″, 1/8″x2″, 1/4″x2″, 3/8″x2″. Key-less 3/8 inch chuck with internal back stop.

 

JET AP-5 5 Ton Arbor Press #ad - For all production and assembly applications. Tables and slotted table-plates are flat and parallel to provide accurate support. Precision cut steel rams and pinions for accurate operation. Arbor presses.

 

Palmgren AP10 1 Ton Arbor Press #ad - Base drilled for mounting on a bench or pedestal. The base is machined to hold the three bit set. Sturdy, cast-iron construction. Rugged steel ram is driven by a machined pinion. Includes three piece bit set, 1 pointed, 1 round, and 1 square end bit, and a removable steel anvil.

 

3 TON RATCHET TYPE ARBOR PRESS (8600-3401) #ad - Capacity over the table is 12-5/8″ ~ weight is 132 lbs. Height of the press is 21-1/2″ ~ maximum work diameter is 12″ ~ arbor is 1-1/2″. Heavy-duty casting frame ~ 4-position anvil. Ratchet device permits lever to be used in most convenient position. Hand wheel advances ram to work quickly.

 

HHIP 8600-3301 2 Ton Ratchet Type Arbor Press #ad - 2 ton ratchet type arbor press. Height of the press is 18-1/2″. Ram is 1-1/4″. Weight is 100 lbs. Ratchet device permits lever to be used in most convenient position. Arbor is 1-1/4″. 4-position anvil. Maximum work diameter is 11-7/8″. Capacity over the table is 8-1/2″. Heavy-duty casting frame. Hand wheel advances ram to work quickly.

 

Palmgren Arbor press, 0.5 ton by Palmgren #ad - Dake 11-1/2″ table distance 3 ton capacity single-leverage. Palmgren arbor press, 05 ton.

 

Palmgren AP30 3 Ton Arbor Press #ad - Base drilled for mounting on a bench or pedestal. Rugged steel ram is driven by a machined pinion. The base is machined to hold the three bit set. Includes three piece bit set, 1 pointed, 1 round, and 1 square end bit, and a removable steel anvil. Sturdy, cast-iron construction.

 

Central Machinery 1 Ton Arbor Press #ad - 1-ton arbor press handles your smaller heavy-duty production and assembly work mount this hand-operated arbor press onto, visit harbor freight tools for more information. .

 

KAKA Industrial AP-2S Arbor Press, Adjust Press Height Jewelry Tools, Solid Construction, Easy Operation 2 Tons Arbor Press #ad - Solid construction will guarantee a long term service life. 2 ton capacity allows more leverage when its in use. We always fulfill what we have promised kaka industrial ap-2s arbor press overview the 2 ton arbor press is a great product for making jewelry tools and many more. It is also easy to adjust the working height with the handle. Specificationmodel ap-2scapacity (kn) 20handle power (n) 200travel (in) 8″ +3-1/8″table size 8″x6″packing size 15x11x18″shipping weight 51 lbs. About kaka industrial a company delivers high quality products with fast shipment and lowest price possible. The bench type makes it easy to use.

 

Klutch Arbor Press – 3-Ton Continuous Force #ad - 12 1/4. Applies 3 tons of continuous force to handle the extra tough jobs durable cast iron construction solid anvil surface for tough pounding and shaping tasks. This klutch arbor press is a strong, precise press that applies the pressure essential for seating, stamping and removing bearings and performing other high-pressure assembly, repair and production jobs. 17, ram square in. 1 1/2 x 1 1/2, base l x w in. 1-2, ratio 201, continuous force tons 3, ramp length in. 8 1/8 x 8 1/2, max. Press height in. Largest arbor in.

 

HHIP 8600- Lever Arbor Press, .25 ton Capacity, 12″ Length x 5″ Width Base, 7.6″ Height (Pack of 1) #ad - Throat clearance 6-inches. Up stroke limiter 25 ton press capacity. The base consists of two mounting holes for 25-inches socket cap screw. Utilizes a 5/8-inches diameter precision ground ram, press consists of a ground cast iron base and separate column. Adjustable down stop.

 

SWAG Arbor Press Plates (Pair) (7″ X 7″) #ad - We currently offer 4 different sizes of arbor plates 7. These arbor press plates are to replace the junk cast arbor plates that are prone to shattering under heavy load. 0″ ideal size for factory replacement of the 12 ton harbor freight cast arbor plates 8. 0 on pirate4x4 who was generous enough to provide the story below. Cut out of high strength grade 50-a572 steel plate. About 1/4″ left to go i gave one good pull and i heard pow i felt like i had been punched in the face by a gorilla as the cast arbor plate had just exploded. 00″ x 1. 50″ 12. 75″ x 9. When i returned to the shop i was looking at the press and noticed the porous nature of the arbor plates. 75″ x 1. 50″ x 10. 00″ x 7. Learn from others and look at the 3rd picture above provided by mud slayer 2. I was driven to the dr. 00″ x 1. 00″ x 1. I was told i was very lucky i didn’t lose my eye. 00″ x 12. “I was pressing on a bushing using a harbor freight 20 ton press with the provided cast arbor plates. Office where i got 8 stitches. 50″ the low cost cast arbor plates that are typical provided with hydraulic presses, often fail under shock loading. One of the guys in the shop came over to check on me and said “dude you’re face is bleeding” i had a gash right next to my left eye. 50″ ideal size for factory replacement of the 20 ton harbor freight cast arbor plates 9. I felt the bushing starting to get stiff. “. This was the day i learned about the material properties of cast iron.

 

1 Ton Arbor Press #ad - . Heavy castings. Heavy stub teeth. Precision made. The “maximum work diameter” dimension is twice the distance from the center of the ram to the back of the throat. Steel rams + pinion.



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.