Best 18 Lifting Clamps

 

Vestil HPC-40 Horizontal Plate Lifting Clamp, Steel, 1-1/4″ Plate Thickness, 4000 lbs Working Load Limit, 1.2″ Bale Opening - Plate must be clean and free of oil. Heavy-duty steel construction for years of reliable use. Lift only one plate at a time. 20 specifications. 800 pounds min uniform plate weight. For use with materials with a surface hardness to 30 rc (300 hb). Designed for lifting plate material in horizontal position. Meets asme b30. Do not use plate clamps to lift loads less than 20 percent of rated capacity. Not designed to use on stainless steel or aluminum plates. .

 

Campbell 6423805 Short Leg Structural GX Lifting Clamp with Chain Connector, 1/16″ – 3/4″ Grip, 1 ton Working Load Limit - Available in the non-locking or small tonnage locking styles. Use of this clamp increases the flexibility of multiple leg chain slings. Clamp is made of drop forged and heat treated alloy steel. Short leg structural “gx” style chain connector clamp. Fitted with the chain connector in place of the clamp shackle.

 

All Material Handling PCUA050 Universal Plate Lifting Clamp, 5 Tons, 2″ Plate Thickness - Individually serialized and tested to 2 x wll. For use with materials having surface hardness < hbc 41. 180° turning range for easy positioning or transfer of plates. All steel body for durable strength in a smaller size. Lever insures pre-tensioning and release of grip jaws.

 

Crosby Lifting Clamp IP-MAINT MANT KT .5-IP10/U10 (2715054) - Jaw opening adjusts for a wide range of tapered or flat-flanged beams. Lightweight portable design left-hand and right-hand clamp screw allows for quick clamping and unclamping. Optional ubc suspender for perpendicular mounting and for oversized hooks. Lock nut feature resists loosening to improve secure clamping built-in suspension pin for low headroom. Campbell 6423925 vertical and horizontal to vertical gx plate lifting clamp, 1, 1-3/4 grip, 3 ton working load limit.

 

Campbell 6420705 Horizontal or Vertical Locking “E” Plate Lifting Clamp, 1/2″ – 2-1/2″ Grip, 8 ton Working Load Limit - Clamp lifts from either horizontal or vertical position. Has large throat that gives a secure bite and wide grip range clamps 100 percent proof tested, a certificate of test supplied with each clamp. Locking “e” clamp, no 8e. Locks open or closed with a lever. Clamps turn plates through 90 degree.

 

Campbell 6506021 Replacement Cam/Pad Kit for 2 ton GX Lifting Clamps - 1 rivet, 4 sel-locs. Kit contains 1 cam, 1 pad, 1 cam pin, 1 t-spring, 1 pad pin except rpc.

 

Crosby Lifting Clamp IPU10 2.0T 0-1 3/8J UNIV (2701677) - â€¢ Full 180° turning range for material transfer, turning or moving. • Lock open, lock closed ability with latch for pretension on material and then release of material. Allows for easy connection between the clamp and hoist hook. • Wide variety of jaw openings available 0 to 155mm. • Each product is individually serialized, with the serial number and proof load test date stamped on body. • Individually proof tested to 2 times the working load limit with certification. • Available in capacities of. • Maintenance replacement kits are available. • Ipu10h, for use with materials with a surface hardness to 47rc (450hb). Forged alloy components, where required. Serial number is included on the test certificate with maintenance and warranty logbook. • Available in a variety of styles• ipu10, standard clamp for materials with a surface hardness to 37rc (345hb). 5 thru 30 metric tons (higher working load limits are available upon request). • Welded alloy steel body for strength and smaller size. • All sizes are rfid equipped. • Ipu10s, for use with stainless steel material. • optional ip-5000 stinger assembly available (see page 420). • Minimum wll of 10% of maximum wll. • Company name (crosbyip), logo, working load limit and jaw opening permanently stamped on body. • Ipu10j, larger jaw opening. • Manufactured by a iso 9001 facility.

 

Campbell 6506050 Replacement Shackle/Linkage Kit for 5 ton GX Lifting Clamps - Linkage assembly pre-assembled for easier installation. Kit contains 1 shackle, 1 radius link, 1 t-spring, 2 connecting links except rpc. 1 radius link pin, 3 linkage rivets, 2 sel-locs.

 

Campbell 6423010 Vertical and Horizontal to Vertical GX Plate Lifting Clamp, 1/16″ – 1″ Grip, 3 ton Working Load Limit - Drop-forged and heat treated components. Exclusive feature is a patented wear indicator system. When convex teeth are flattened between unique wear indicator grooves. It is time to change the cam. Can be used for both vertical and horizontal-to-vertical through 180 degree.

 

Campbell 6423900 GX Plate Lifting Clamp with Chain Connector, 1/16″ – 5/16″ Grip, 1/2 ton Working Load Limit - Clamp is made of drop forged and heat treated alloy steel. Use of this clamp increases the flexibility of multiple leg chain slings. Available in the non-locking or small tonnage locking styles. Fitted with the chain connector in place of the clamp shackle. Gx style chain connector clamp.

 

Campbell 6422001 Vertical and Horizontal to Vertical GXL Plate Lifting Clamp, 1/16″ – 3/4″ Grip, 1 ton Working Load Limit - When any of cam’s straight line, convex teeth are flattened between unique wear indicator grooves, it is time to change the cam. Available in a 1/2, 1 and 2 ton capacity. Comes in standard pack. Exclusive feature is a patented wear indicator system. Drop forged and heat treated components, with gripping surfaces of case hardened alloy steel.

 

Crosby Lifting Clamp IP10 0.5T 0-5/8J STR. EY (2701674) - â€¢ Welded alloy steel body for strength and smaller size. • Optional ip-5000 stinger assembly available (see page 420). Serial number is included on the test certificate with maintenance and warranty logbook. • Maintenance replacement kits are available. • Individually proof tested to 2 times the working load limit with certification. • Available in a variety of styles• ip10, standard clamp for materials with a surface hardness to 37rc (345 hb). • Lock open, lock closed ability with latch for pretension on material and then release of material. • Minimum wll of 10% of maximum wll. • Each product is individually serialized, with the serial number and proof load test date stamped on body. • Ip10s, for use with stainless steel material. Allows for easy connection between the clamp and hoist hook. • All sizes are rfid equipped. 5 thru 30 metric tons (higher working load limits are available upon request). • Full 180° turning range for material transfer, turning or moving. • Wide variety of jaw openings available 0 to 155mm. • Ip10j, larger jaw opening. • Company name (crosbyip), logo, working load limit and jaw opening permanently stamped on body. Forged alloy components, where required. • Ip10h, for use with materials with a surface hardness to 47rc (450 hb). • Manufactured by a iso 9001 facility. • Available in capacities of.

 

Crosby Lifting Clamp IPMISC SPNDL SCRED 2-IPTK (2720180) - Small size for applications on beams with a low base height. Provides a quick and versatile rigging point for hoisting equipment, pulley blocks or loads. Flexible application due to wide adjustment range. The central threaded spindle allows easy attachment and a solid grip. The spindle can be secured against loosening.

 

Vertical Plate Lifting Clamp With Lock Hoist Hook Chain Lifter Machine 3Ton - Â  â–ªOverload is forbidden. Feature â–ªthis clamp is made of high-quality alloy steel. It is made from low-carbon high-quality alloy steel featuring high strength, corrosion resistant and high temperature resistant. Notetwo colors, random delivery item included(170440) 1 pc vertical plate lifting clamp. Vertical plate clamp is used to vertically lift plate material. â–ªThe clamp can only lift one piece of plate at one time. These lifting clamps include a pivoting bail for versatile, smooth operation and automatic serrated hardened steel pads and cams.

 

Campbell 6506000 Replacement Shackle/Linkage Kit for 1/2 ton GX Lifting Clamps - 1 radius link pin, 3 linkage rivets, 2 sel-locs. Kit contains 1 shackle, 1 radius link, 1 t-spring, 2 connecting links except rpc. Linkage assembly pre-assembled for easier installation.

 

Vestil HPC-80 Horizontal Plate Lifting Clamp, Steel, 1-3/8″ Plate Thickness, 8000 lbs Working Load Limit, 1.2″ Bale Opening - Do not use plate clamps to lift loads less than 20 percent of rated capacity. Not designed to use on stainless steel or aluminum plates. 1600 pounds min uniform plate weight. Meets asme b30. Heavy-duty steel construction for years of reliable use. Lift only one plate at a time. Designed for lifting plate material in horizontal position. 20 specifications. Plate must be clean and free of oil. For use with materials with a surface hardness to 30 rc (300 hb).

 

1 Ton Lifting Clamp HLC Type - Clamp weighs 37 lbs. Locked in open/closed position. Jaw opening 0-98″. Capacity 9900 lbs. 1 ton capacity / 04″-1/2″ clamping range.

 

Campbell 6422012 Vertical and Horizontal to Vertical GXL Plate Lifting Clamp, 1/16″ – 5/8″ Grip, 1/2 ton Working Load Limit - Never tamper with clamps tension arm and spring mechanism during a lift. Newly designed “cam engaging lever” keeps the cam in contact with plate. Clamps 100 percent proof tested, a certificate of test supplied with each clamp. The tension arm and spring mechanism facilitate attaching and removing clamp.